Mongolian coal is a kind of boring with high viscosity and high water content. The common drying methods are dry, boring, uneven, dry or wet. Ono's characteristic of the Mongolian coal company has newly developed a set of equipment suitable for the drying of the coal/tjcp/28/ the Mongolian coal dryer. It has the characteristics of the traditional dryer and adopts the low temperature reflow drying technology. In order to ensure the coal to achieve the corresponding drying requirements under the same conditions of the Mongolian coal, the dryness of the dried material is consistent with the color, which is very ideal.
The cinder crusher that Ono Company devotes itself to research and development is mainly the equipment for smashing the cinder. The crusher is equivalent to breaking two hammers into one, and the reasonable combination becomes a whole. Two sets of rotors are used in series to make the upper rotor hammer. The crushed no-feed material is immediately crushed by the rapidly rotating rotor of the lower rotor, and the material in the cavity collides with each other at high speed and collides with each other to achieve the effect of hammer powder and material powder, and is directly discharged. And it also has a good effect on high-humidity cinders/cpdh/30/ It solves the problem of headaches where the wet material is difficult to crush.

Our main products: Mongolian coal dryer Coal gangue crusher Coal crusher FGD gypsum ball press

The new type of gangue crusher developed and produced by the professional crusher manufacturer Ono Company with long-term accumulated rich experience has the following characteristics:
1. The start-up is smooth and there is no noise. The entire crushing process requires only one person.
2. Omnidirectional control buttons make it easier to control the crusher.
3. Pollution-free operation is simple and maintenance is more convenient.
4. The use of wear-resistant sorghum 12 through the osmotic treatment, greatly improving the applicability.
5. Low energy consumption and high output, in addition to uniform fineness, can fully and effectively crush the material.
In order to respond to the policy of low carbon and environmental protection, Ono Company has vigorously developed and developed a new pressure ball machine equipment production line and independently developed a new type of pressure ball machine equipment. The successful development of the desulphurization gypsum ball press has filled the gaps in the domestic market, which indicates that Ono's company has the ability to independently develop high-grade, large-tonnage, low-price ball press equipment. Over the years, ONO has continuously innovated and reformed to meet customers' higher requirements for pressure ball machines. Customer satisfaction is the driving force behind our production.
Other company products: soil block crusher calcite crusher opal crusher wollastonite crusher asbestos tile crusher perlite crusher talc crusher feldspar crusher quartz stone crusher crusher crusher
【Contact information】
Company Name: Henan Ono Machinery Sales Tel: 0371-69586777, 69586888
Business phone: 15138975000

Blended Powder

A blended powder of tungsten carbide and Metal Alloy Powder can be used for laser cladding, a process used to deposit a layer of material onto a substrate using a laser beam. This blended powder is typically used as a feedstock material for laser cladding applications where high wear resistance and hardness are required.

Tungsten carbide is a hard and wear-resistant material that is commonly used in cutting tools, mining equipment, and other high-wear applications. It has excellent thermal conductivity and high melting point, making it suitable for laser cladding processes.

Metal alloy powders, on the other hand, are often added to the Tungsten Carbide Powder to enhance certain properties or tailor the characteristics of the final cladding layer. These metal alloys can include nickel, cobalt, chromium, or other elements, depending on the specific requirements of the application.

The blended powder is typically prepared by mixing the tungsten carbide and metal alloy powders in the desired ratio. This mixture is then fed into a laser cladding system, where it is melted using a high-power laser beam. The molten powder is rapidly solidified onto the substrate, forming a dense and wear-resistant cladding layer.

The resulting cladding layer can have excellent hardness, wear resistance, and thermal conductivity, making it suitable for various applications such as tooling, wear parts, and surface protection. The specific properties of the cladding layer can be adjusted by varying the composition and ratio of the tungsten carbide and metal alloy powders in the blend.

Overall, the blended powder of tungsten carbide and metal alloy powder offers a versatile and customizable solution for laser cladding applications, providing enhanced wear resistance, hardness, and other desired properties to the final cladding layer.

WC Blend,Blended Powder,High Hardness Powder,Blended Coating Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvaf.com