The “Key Technologies and Demonstration of Waste Tire Remanufacturing †jointly undertaken by Chongqing Chaoke Industrial Development Co., Ltd. and Chongqing University was approved by experts. At the same time, the annual production capacity of 500,000 scrap tire remanufacturing production lines has also officially put into operation, marking a major breakthrough in China's scrap tire remanufacturing technology. China is a country with large rubber consumption. The total amount of raw rubber consumed is more than 4 million tons, ranking the first in the world. However, it is a country with very scarce rubber resources. About half of the annual consumption needs to be imported. At the same time, China is also a tire-producing country, reaching 420 million in 2010, surpassing the U.S. ranking first in the world. In 2010, the world’s new tire production was about 1.6 billion, and nearly 1.1 billion were scrapped. China produces 140 million waste tires each year. After recycling, it only refurbished and used more than 15 million, and its utilization rate was 11%. The recycling rate of used tires in the United States and other developed countries was over 70%. Professor Li Zhaoqing from the School of Environment and Resources at Chongqing University introduced that there are two kinds of tire retreading technologies, namely the traditional model method and the pre-cured tread method. The latter is an international popular technology developed in the past 30 years. Its main technical feature is high temperature (150 °C), high pressure (4.5Mpa), pre-vulcanized the tread, and then use low-temperature adhesive to bond the pre-vulcanized tread rubber to the carcass, and then put the tire into the tire vulcanizing tank and adopt low pressure and low temperature. Vulcanization setting. The traditional model method is called “cold turningâ€, and the pre-cured tread method is called “hot turningâ€. The latter can extend the service life of the tire several times. Among the number of retreaded trucks, pre-cured retreaded tires accounted for the percentage of total tires refurbished, with Europe and the United States reaching more than 82%, and China only 45%. The average number of tire retreads in China is 1.3 times, and developed countries have reached more than 3 times. In addition to tire manufacturing quality and usage factors, the temperature of the tire retreading process is also a major factor affecting whether the tire can be refurbished many times, so reducing the temperature of tire retreading and vulcanization process is important for improving the overall quality of tire remanufacturing and improving the service life of retreaded tires. significance. However, ultra-low temperature technology and key equipment have been monopolized by foreign companies for a long time, which has restricted the development of the domestic tire remanufacturing industry. Chongqing Chaoke Industrial Development Co., Ltd. cooperated with Chongqing University to conduct cooperation in production, learning and research. It inspected the relevant technology and equipment of developed countries in Europe and North America. It applied ultra-low temperature tire adhesion mechanism, ultra-high pressure compound wear-resistant rubber wear mechanism and application of new materials. A more in-depth study. The research group carried out technological innovations and focused on researching ultra-low temperature tire adhesive formulations, ultra-high pressure compound wear resistant tread rubber formulations, pre-cured tread ultra-high pressure fine vulcanization processes, and tread extrusion compound extrusion molding processes. High-strength pre-vulcanized tire tread mold, tread rubber composite extrusion process, no-coating glue process, ultra-low temperature adhesive glue bonding process, sidewall side outer repair normal temperature special soft rubber and process, tread pattern groove filling The strip vulcanization technology, etc., mastered the ultra-low temperature pre-sulfurization technology, broke the monopoly of foreign companies, and formed independent intellectual property rights. Topkit tower cranes are commonly used in construction projects, particularly in high-rise building construction. They are known for their versatility, reliability, and ease of use. The counterweight system can be adjusted to accommodate different lifting requirements, making them suitable for a wide range of applications. 5T Tower Crane,Topkit Tower Cranes,Tower Cranes,5T Hammer head Tower Crane,Hammer head Type Tower Crane SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com
Some advantages of topkit tower cranes include:
1. High lifting capacities: The top-mounted counterweight system allows for increased lifting capacities, making them suitable for heavy lifting operations.
2. Increased hook height: The counterweight system also enables higher hook heights, allowing for efficient construction of tall structures.
3. Easy assembly and disassembly: Topkit tower cranes are designed for easy assembly and disassembly, making them convenient for construction sites with limited space or frequent crane relocation.
4. Versatility: These cranes can be equipped with various types of jibs and attachments to meet different project requirements, such as luffing jibs for working in confined spaces or jibs with multiple trolley systems for increased productivity.
5. Cost-effective: Topkit tower cranes are generally more cost-effective compared to other types of tower cranes, making them a popular choice for many construction companies.
Overall, topkit tower cranes are widely used in the construction industry due to their high lifting capacities, versatility, and ease of use. They play a crucial role in the efficient and safe execution of construction projects.