Three Qin is: diligently observe the changes in the bubble, diligently measure the concentration and adjust the diligence; The four standards are: the quasi-formulation of oil preparation and addition, the change of grades, the reason for the change, the standard of the amount of foam scraping; The four good things are: the flotation is well connected with the medicine station, the flotation and grinding are well connected, the flotation and the sand pump are well connected, and the mixed flotation and priority sorting are well connected; The two are timely: the timely development of problem research and the timely resolution of problem solving; One does not move: do not tamper with the flotation machine gate.
SF-200 is a Hand belt type resistance Forming Machine which is the best selection for mass production.Easy adjustment,operation and long life.
SF-201 is the same as SF-200,Beside above ,they are Loose Tape resistance Former suitable for vertical or horizontal shaping of resistors and diodes.
SF-202Component bending forming machine is bulk, with resistance and diodes are available.Foot cutting, bending can be strengthened, foot long span can be adjusted.
SF-208FB Axial automatic resistor machine has three Models for Processing Different Type of Packing.
SF-206 The bulk Resistor Former has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.
SF-208 Equipment K Type Resistance Molding Machine has three Models for Processing Different Type of Packing.â‘ Loose packed Model(SF-208-FA).â‘¡Taped Model(SF-208-FB).â‘¢ Loose packed/taped combinative Mode(SF-208-F).
SF-206MB The axial lead former m type has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.It is also means automatic resistor forming m machine.
Resistance Molding Bending Machine,F Resistor Cutting Machine,Component Cutting Forming Machine,Components Lead Cutting Machines SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com
China is currently developing a number of mineral processing plant by the actual production of a set of necessary flotation method of operation, each flotation workers should seriously grasp and understand. Its main content is: three Qin, four quasi, four good, two timely, one does not move.