*Strong stability: working stability in AC 100-240V, and suitable for the range of 50-60Hz
* High protection level: protection level reached to IP65, it allowed pump to provide safe services at severe operaton condition
*Ball check valves: it through double valve ball, seat and sleeve to form the sealing system, that enhance the precision
*High speed operation: high measurement precisions, up to 360 strokes per minute which eliminate the pulsation effect.
*Durable diaphragm: the diaphragm is made by PTFE, which is
compatible with all kinds of chemicals. In typical use, the diaphragm
can last up to five years, which 5 times as national standard
GB/T7782-2008
*Several types: manual control or automatic control, the
automatic control can divided to: 4-20mA electric current signal
control, digital impulse signal feedback control, digital impulse
feedback control with Rs485 communication interface, 4-20mA electric
current signal control with Rs485 communication
interface.
*Percentage adjustment: local adjust percentage for stroke
and frequency
0~100%
*Level monitor, low-level shutoff with alarm output
PVDF Head Solenoid Dosing Pump Pvdf Head Solenoid Dosing Pump,Pvdf Head Chemical Dosing Pump,Pvdf Head Dosing Metering Pump,Pvdf Head Solenoid Diaphragm Metering Pump Zhejiang Ailipu Technology Co., LTD. , http://www.alipu.com
Overview
The OD mounted flange facing machine is designed for the flange face, seal groove and serrated finish, weld prep and counter boring. With the latest line and ball screw technology, the equipment adopts the modular design concept as a whole. Each step of design takes the field processing as the starting point. This machine is widely used in the flange connecting of petroleum, chemical, natural gas and nuclear power. With the light weight, this machine is helpful for the on-site maintenance. It ensures the high security and efficiency.
Features
Boring and milling tools are optional
Driven motor: Pneumatic, NC driven, Hydraulic driven
Working range 0-3000mm, Clamping range 150-3000mm
Light weight, easy to carry, fast installation and easy to use
Stock finish, smooth finish, gramophone finish, on flanges, valve seats and gaskets.
High quality finish can be achieved.
The feed of cut is automatic from the O/D inwards.
Standard stock finishes carried out with step: 0.2-0.4-0.6-0.8 mm.
The key words of this product: Flange machine Flange facing machine
Model and Specification
Model
Clamping Range
Working Range
Tool Stroke
Rotating
Pneumatic
NC/Electric
Hydraulic
ODÂ mm
mm
mm
rpm
AYO-500
SKO-500
HYO-500
Ф150-500
Ф100-500
≤110
34
AYO-1000
SKO-1000
HYO-1000
Ф500-1000
Ф200-1000
≤110
24
AYO-1500
SKO-1500
HYO-1500
Ф1000-1500
Ф500-1500
≤110
23Â
AYO-2500
SKO-2500
HYO-2500
Ф1500-2500
Ф1000-2500
≤110
23
AYO-3000
SKO-3000
HYO-3000
Ф2000-3000
Ф1000-3000
≤110
23
Power Supplies
Pneumatic
Air requirement: 1500-3000L/min @0.63-0.8Mpa
Power: 2HP, 3HP, 4HP
Double motor for big model or heavy duty
NC
Electric requirement: 230V 1PH 50/60Hz;
380V 3PH 50/60Hz
Power: 2.0KW or 3.0KW
Double motor for big model or heavy duty
Hydraulic
Hydraulic requirement: 28-50L/min @13Mpa
Electric requirement: 380V 3PH 50/60Hz
Rated pressure: 13MPa
Rated flow: 28L/min
Max. Torque: 380NM
Insert Style
Material: Holder HSS
Insert: HSS-Co or CarbideÂ
Type: Grooving, Facing
AYO SKO HYO OD Mounted Flange Facing Machine
Overview
The OD mounted flange facing machine is designed for the flange face, seal groove and serrated finish, weld prep and counter boring. With the latest line and ball screw technology, the equipment adopts the modular design concept as a whole. Each step of design takes the field processing as the starting point. This machine is widely used in the flange connecting of petroleum, chemical, natural gas and nuclear power. With the light weight, this machine is helpful for the on-site maintenance. It ensures the high security and efficiency.
Features
Boring and milling tools are optional
Driven motor: Pneumatic, NC driven, Hydraulic driven
Working range 0-3000mm, Clamping range 150-3000mm
Light weight, easy to carry, fast installation and easy to use
Stock finish, smooth finish, gramophone finish, on flanges, valve seats and gaskets.
High quality finish can be achieved.
The feed of cut is automatic from the O/D inwards.
Standard stock finishes carried out with step: 0.2-0.4-0.6-0.8 mm.
The key words of this product: Flange machine Flange facing machine
Model and Specification
Model
Clamping Range
Working Range
Tool Stroke
Rotating
Pneumatic
NC/Electric
Hydraulic
ODÂ mm
mm
mm
rpm
AYO-500
SKO-500
HYO-500
Ф150-500
Ф100-500
≤110
34
AYO-1000
SKO-1000
HYO-1000
Ф500-1000
Ф200-1000
≤110
24
AYO-1500
SKO-1500
HYO-1500
Ф1000-1500
Ф500-1500
≤110
23Â
AYO-2500
SKO-2500
HYO-2500
Ф1500-2500
Ф1000-2500
≤110
23
AYO-3000
SKO-3000
HYO-3000
Ф2000-3000
Ф1000-3000
≤110
23
Power Supplies
Pneumatic
Air requirement: 1500-3000L/min @0.63-0.8Mpa
Power: 2HP, 3HP, 4HP
Double motor for big model or heavy dutyNC
Electric requirement: 230V 1PH 50/60Hz;
380V 3PH 50/60Hz
Power: 2.0KW or 3.0KW
Double motor for big model or heavy dutyHydraulic
Hydraulic requirement: 28-50L/min @13Mpa
Electric requirement: 380V 3PH 50/60Hz
Rated pressure: 13MPa
Rated flow: 28L/min
Max. Torque: 380NM
Insert Style
Material: Holder HSS
Insert: HSS-Co or CarbideÂ
Type: Grooving, Facing
Model NO.: AYO SKO HYO
Layout: Portable
Trademark: Co-Pack
Transport Package: Wooden Case / Metal Box (Optional)
Origin: Wenzhou, China
HS Code: 8461909000
Model NO.: AYO SKO HYO
Layout: Portable
Trademark: Co-Pack
Transport Package: Wooden Case / Metal Box (Optional)
Origin: Wenzhou, China
HS Code: 8461909000
AYO SKO HYO OD Mounted Flange Facing Machine