Outdoor portable iron poster stand, floor mounted portable exhibition stand stand, vertical A-type vertical billboard advertising display board, full body iron baking paint, waterproof, foldable, easy to store, easy to change pictures, heavy, firm and windproof, easy to install, applicable to multiple scenes. Stand Frame,Store Sign Holders,Sign Holder,Movie Poster Light Box Guangzhou Jinshiming advertising equipment Co., Ltd , https://www.jsmlightbox.com
In actual life, it is just the use of a dust content detector , or the use of a dust concentration detector, and it is more or less the case of some failures. In the following, Chuangzhilian will briefly introduce to you the common mistakes in the use of dust content detectors.
　　 1 , the content detector in the actual use of the process, the most taboo point is that maintenance in the well, if not, there will be a lot of unnecessary trouble. The intrinsic safety circuit of the instrument and its related component parameters must not be changed during maintenance, and other non-dedicated battery packs must not be used.
　　 2. In the actual maintenance process, the content detector must not change the intrinsically safe circuit of the instrument and its related component parameters, nor can it use other non-dedicated battery packs for use.
　　 3 , content detector in the actual maintenance process, if it meets the instrument can start normally, but there is no flow situation, we only need to reconnect the trachea can be a good solution to this problem
　　 4. In the actual maintenance process, if the content detector is not working after the instrument is turned on, it is generally caused by the low battery voltage and the disconnected internal connection. In this case, we are in fact The use of the process, only need to be charged, the line connection number can be a good solution to this problem.
　　 5 , content detection instrument in the actual maintenance process, if it is encountered the instrument battery charge or not power, then either the battery, or the charging socket has been damaged, or is caused by the charger fault, for this In the case of actual operation, we only need to do a good job of repairing the battery, changing the outlet, and the charger, so that we can solve this problem very well.
Whether it is in the process of using the dust content detector or in the process of using the dust concentration detector , failure occurs and it is cleared in time so as not to affect our actual operation.