A Panel Bender is a machine used in sheet metal fabrication to bend and shape metal panels. It is commonly used in the automotive and aerospace industries to produce body panels and other components. The panel bender uses a series of rollers and bending tools to shape the metal into the desired form. The operator can adjust the angle and radius of the bend to create precise shapes. Panel benders can handle a wide range of sheet metal thicknesses and can produce complex shapes with high accuracy. Panel Bender,Automatic Panel Bender Machine,Cnc Bending Machine,Sheet Bending Machine,CNC panel bending machine,panel bender,panel bender vs press brake,panelbender,pressbrake,panel bender for sale FOSHAN RAGOS NC EQUIPMENT CO.,LTD. , https://www.ragospressbrake.com
2. Prevent demagnetization (1) Magnetic moment can not be designed too small. (2) It should be run under the specified temperature, the medium temperature is strictly not allowed. A platinum resistance temperature sensor can be installed on the outer surface of the magnetic pump isolation sleeve to detect the temperature rise in the annulus area so as to alarm or stop when the temperature exceeds the limit 3. Prevent dry friction (1) Do not idle. (2) It is forbidden to use the medium to empty. (3) In the case of the outlet valve is closed, the pump continuous operation time shall not exceed 2min, to prevent the magnetic actuator from overheating failure.
1. Prevent particles from entering (1) Does not allow ferromagnetic impurities, particles into the magnetic clutch and bearing friction. (2) After conveying the easily crystallized or precipitated medium, it should be rinsed promptly (after the pump is stopped, pour water into the pump chamber and discharge clean after running 1min) to ensure the service life of the sliding bearing. (3) When transporting media containing solid particles, filter at the inlet of the pump tube.