With the economic development, people have developed laser cutting machines. Laser cutting machine is a modern high-tech product, widely used in all walks of life, most companies use the laser cutting machine for a short time, so it is not a good thing for the laser cutting machine itself. As long as the machine is running, it can play its role. In the process of using, we must regularly perform some maintenance work and maintenance on the laser cutting machine so that the laser cutting can maintain good performance. In the process of using, it is easy to have some problems. This will reduce the working efficiency of the laser cutting machine, so we need to regularly maintain the laser cutting machine. What is green? When we entered the forest, it was as if we had jumped into a green ocean and were immediately engulfed by it. Green is the color of life, the forest is as green as jade, the valleys are covered with green velvet, the river is like flowing grease, and the moist air gives a crystal like feeling. Green, also known as the color of eye protection, when you are tired of watching TV, computer, or using your eyes, go out and look at the green lawn, green plants, or you can also keep some green plants at home. Will your eyes feel particularly comfortable? Put a pot of green plants next to your desk, and children who have been reading and studying for too long can shift their attention to green. Due to the unique characteristics of green, we have used it as the color for the Ebike Frame of Electric Bicycles. Imagine children riding a green Electric Bicycle home after a busy day of learning, which not only gives their eyes a good rest but also exercises their body, achieving two goals with one stroke. At present, our LC02 and Mini models have green options, which you can choose according to your children's preferences. E Bike,Electric Bike 180 Km Range,Ebike Vs Dirt Bike Ejoysport Technology (SuZhou)Co.,LTD , https://www.yqejoysport.com
1. The condenser, ventilation, and filter maintain the best state of the system. Then we must perform dust removal on the three components of the condenser, ventilation, and filter. Take the filter of the cutting machine from both sides, use a certain amount of detergent and water to remove the dust on the filter, clean it once more, then dry it.
2, pure water filter For pure water filter, we have to regularly filter or replace the filter.
3. In the process of using the laser cutting machine, we need to periodically check that there is no need to add water. In the cutting machine, the water in our tank needs to cover the coil in the tank. If the water is lower than the coil, we add the medicine. add water. The water quality in the cutting machine is also very important, so we need to replace the water in the cutting machine regularly. When the pump water volume decreases during use, this is because the air in the water pump body causes the water volume to become smaller. At this time, you need to press. The red button on the water filter removes air from the water system and waits until the water flow is normal.
In order to reduce the failure of the laser cutting machine, we need to maintain the cutting machine to reduce the failure during use.