Researchers at Columbia University's School of Engineering have developed a technology that can be used to create single-layer diodes that can be up to 50 times faster than current nanodiodes. The team, led by Latha Venkataraman, an associate professor of applied physics, is perhaps the first team to successfully create a single-molecule diode that can be put to practical use. Details of the paper on this new discovery have been published in the recent issue of Nature Nanotechnology. Although we have already reported shrinking motherboards, new processors, and microelectronics, we've seen a quantum leap forward. You know, as early as 1974, there was already a theory that could treat a single molecule as a one-way electrical conductor. Prior to the molecular diode, the use of an asymmetrical structure to introduce asymmetric one-way current. However, their "current switching ratio" (rectification ratio / rectification ratio) is too low to be considered invalid. Venkataraman's team replaced "molecular asymmetry" with "environmental asymmetry." That is, the molecular diode is surrounded by an electrolyte (ionic solution) and gold electrodes of various sizes to form an asymmetry at the junction of the molecular environment. Ultimately, this molecular diode achieves a current of 0.1 microamps - though this may seem modest, the current it passes is quite high for a single molecule. Venkataraman said the study is easy to reproduce and is expected to be applied to nanodevices such as graphene and carbon nanotubes in the future. [Compiled From: SlashGear, Source: Nature Nanotechnology, via: Science Daily] This product belongs to the second era crylic acid structural glue developed by the freshest technology from German. It has rapid solidification at normal temperature, multi-purpose, powerful strength, long shelf life, powerful peel strength, aging-resistance, climatization- resistance and easy for mixing operation and application. It can availably adhesive the surface with a little water or oil. The general function is better than common structural glue. Auto Parts Glue,Acrylic Adhesive,Tire Patch Glue,Acrylic Adhesive Glue Hunan Magpow Adhesive Group co.,ltd , https://www.magicglue.net
Scope of application:
Quick adhesive and seal for metal, plastic (PVC, ABS, PS, PC), pottery, wood, polystyrene, glasses and cements etc. or quick bond and repair of motors, motorcar, tractor, electric engines, instruments ,washing machine, crafts, weaving machine, metallurgy and smelting machine and refrigerator etc.
Using Method:
Remove the oil, dust from the surface and keep clear, dry.
2. Paste evenly at 1:1 from two tubes, paste separately on each side and press for solidification. Normally solidify after 5-8 at normal temperature, reach the highest at 24 hours
Warning:
1. The taking glue tool could not mix use, should be tightly sealed,
do not mix Cap A and B.
2. The glue quantity should not exceed, use at the scene. The operation place should be ventilate and far from fire.
3. Avoid the skin contact, if touches the skin, clean with soap water, if touches the eye carelessly, uses the massive clear water flushing immediately, go to hospital for serious situation.
4. Do not get into mouth, keep out reach of kids.
5. Make a trial usage in advance to avoid mistake.