Model NO.: RKM-1384
Application: Film, Sheets, Pipe, Plates, Granules, Recycling, E
Material: Wearable Metals as 5crw2si,6crw2si,9cr Si,H13,Cr12
Production Type: as Custoner′s Drawing
Trademark: Renke
Transport Package: Wooden Cases with Carton Packing
Specification: OEM, 118X17X0.9mm
Origin: China
HS Code: 8208900000
Model NO.: RKM-1384
Application: Film, Sheets, Pipe, Plates, Granules, Recycling, E
Material: Wearable Metals as 5crw2si,6crw2si,9cr Si,H13,Cr12
Production Type: as Custoner′s Drawing
Trademark: Renke
Transport Package: Wooden Cases with Carton Packing
Specification: OEM, 118X17X0.9mm
Origin: China
HS Code: 8208900000

Carbide strips are widely used for general wood cutters / hard wood cutters, plastic and tobacco cutting.

And it is suitable for the production of various types of motors, electronic progressive dies punches.

Tungsten Carbide - Main Property:

  1. Excellent Hardness: 86~93 HRA, which equal to 68~81HRC;
  2. Excellent hot working performance: Hardness could be remained at 60 HRC under 900~1000 ºC
  3. Excellent wear resistance;
  4. High cutting speed;
  5. Long service life
TX Grade Grade ISO Grade Hardness Density Bending Strength Recommended Application
T100X YG6X K10-K15 91-93 14.8-15 ≥1600 Suitable for little stress conditions, produce for small diameter steel wire, non-ferrous metal wire or rod.
T100 YG6 K10-K20 90.5-92 14.8-15 ≥2000  Suitable for large stress conditions, produce for medium diameter of steel wire, non-ferrous metal wire or rod.
T200 YG8 K20-K30 89.5-91 14.6-14.8 ≥2100 Suitable for steel, non-ferrous metal and alloy rod and tube,and is suitable for manufacturing machinery parts, tools materials and wear parts
T200C YG8C K20-K30 89-90.5 14.6-14.8 ≥2200 Coarse grain size carbide,suitbale for drilling medium hard or hard stratum with f less than 14th and the coal bed containing hard rock;Coal Cutter Bits;Oil Field Bits,and Hammer Drill bits.
T300 YG9 K20-K30 87.5-89 14.3-14.5 ≥2200 With good good resistance, impact resistance and good shock resistance, suitable for carbide drills, drill pills.
T300C YG9C K20-K30 87.2-88.6 14.4-14.6 ≥2300 Coarse grain, with good wear resistance, suitable for drilling hard rock.
T400 YG10 K20-K30 87-88.5 14.3-14.6 ≥2300 With good abrasion resistance, excellent impact resistance and good shock resistance, suitable for cemented carbide buttons and flat-tio-serrated compacts.
T500 YG11 K30-K40 89-90.2 14.2-14.5 ≥2300 With good wear resistance, suitable for producing nail making moulds,nails specially for cement industry
T500C YG11C K30-K40 86.5-88 14.2-14.5 ≥2400 Coarse grain, with good wear resistance, suitable for drilling hard rock.
T600 YG12 K30-K40 86.5-88 14.1-14.4 ≥2400 With good toughness, suitable for making steel pipe, steel, non-ferrous metal and alloy rods, bars,tubes
T700 YG15 K40 87-88.5 13.9-14.2 ≥2400 Low wear resistance, high bending strength and impact toughness. Suitable for cemented carbide dies,stamp dies and mould cores,etc.
T700C YG15C K40 85-86.5 13.9-14.2 ≥2450 With very good impact and shock resistance,suitable for tungsten carbide dies and mould cores,etc.
T800 YG20   83-85 13.4-13.6 ≥2700 Suitable for wear parts, plates and mechanical parts.
T800C YG20C   82.5-84.5 13.4-13.6 ≥2700 Suitable for cold heading moulds,cold punching moulds and cold rolls for standard parts and tools in various industries.
TN100 YN6   90.5-92.5 14.8-15.1 ≥1700 With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.
TN200 YN7   90-92 14.7-14.9 ≥1800 With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.
TN300 YN10   86-88 14.3-14.6 ≥2000 With good corrosion resistant,suitable wear resistance.
TX35T     93-95 7.9-8.1 ≥1700 With good corrosion resistant,suitable wear resistance.
 

Tungsten Carbide Plastic Cutting Blade for Cutting PP, PE, Pet, BOPP Film


Production Range:

From Application

Blade for cutting thin film
Blade for cutting plastic

Blade for cutting paper
Blade for cutting leather

Blade for cutting Rubber
Blade for cutting metal

Blade for cutting wood
Blade for printing& ink

Blade for cutting fiber
Blade for cutting Cardboard

Blade for cutting food
Blade for cutting Electrical material

Press Brake Tooling
Press brake Dies
 

From Shape

Circular Saw Blade
Rectangular knife

Teeth Type Knife
Repand Type Knife

Sharp-nosed Type knife
Strip steel blades

Trapezoid blades
Special blades
 

From Material

Carbide blade
Ceramic blade

Carbon steel knife
HSS blades

TCT tipped blade
Stainless steel blades

 
Our Features: 

Material
 
Aluminum, Tungsten carbide, Mild steel ,Stainless steel, Chrome steel,
Cold rolled sheet, High Speed Steel, Bearing steel, brass, Copper, Bronze,  
Chrome copper, Mold steel ,SKH51,SKD11,SKS7,SK2,Cr12Mov,H13,9CrSi,
6CrW2SiW6Mo5Cr4V2,YG8,YT15,P20,K30 etc.
 

Surface Treatment          
Plated nickel, copper, zinc .etc. and anodized (Anodic oxidation can accord with
MIL - A - 8625 Type II standards) Hard Anodizing, owder coated, polished, sand
blasted, chemical surface treatment. As customer's request

 
Our Advantages:
1. We are factory providing all kinds of cutting blades, also can manufacture according to your drawing.
2. Low MOQ (1pc is even acceptable in some special conditions)
3. Offering free and quick prototyping (normally 1 week)
4. A series of secondary service available, like casting; forging; welding; heat treatment etc.
5. Top quality guaranteed by skilled workers, managing system and status of facilities.
6. Customized size and spec /OEM available
7. Near Ningbo and Shanghai, convenient transportation

Our Mission
 
Quality & Service: our always have been providing our clients with great quality products and superior customer service.
 
Quick LeadTime: We're dedicated to providing the quickest turnaround times and work very hard to ensure that all of your deadlines are met.
 
Unbeatable Prices We continuously strive to find ways to reduce our production costs, and pass the savings over to you!

Carbide strips are widely used for general wood cutters / hard wood cutters, plastic and tobacco cutting.

And it is suitable for the production of various types of motors, electronic progressive dies punches.

Tungsten Carbide - Main Property:

  1. Excellent Hardness: 86~93 HRA, which equal to 68~81HRC;
  2. Excellent hot working performance: Hardness could be remained at 60 HRC under 900~1000 ºC
  3. Excellent wear resistance;
  4. High cutting speed;
  5. Long service life
TX Grade Grade ISO Grade Hardness Density Bending Strength Recommended Application
T100X YG6X K10-K15 91-93 14.8-15 ≥1600 Suitable for little stress conditions, produce for small diameter steel wire, non-ferrous metal wire or rod.
T100 YG6 K10-K20 90.5-92 14.8-15 ≥2000  Suitable for large stress conditions, produce for medium diameter of steel wire, non-ferrous metal wire or rod.
T200 YG8 K20-K30 89.5-91 14.6-14.8 ≥2100 Suitable for steel, non-ferrous metal and alloy rod and tube,and is suitable for manufacturing machinery parts, tools materials and wear parts
T200C YG8C K20-K30 89-90.5 14.6-14.8 ≥2200 Coarse grain size carbide,suitbale for drilling medium hard or hard stratum with f less than 14th and the coal bed containing hard rock;Coal Cutter Bits;Oil Field Bits,and Hammer Drill bits.
T300 YG9 K20-K30 87.5-89 14.3-14.5 ≥2200 With good good resistance, impact resistance and good shock resistance, suitable for carbide drills, drill pills.
T300C YG9C K20-K30 87.2-88.6 14.4-14.6 ≥2300 Coarse grain, with good wear resistance, suitable for drilling hard rock.
T400 YG10 K20-K30 87-88.5 14.3-14.6 ≥2300 With good abrasion resistance, excellent impact resistance and good shock resistance, suitable for cemented carbide buttons and flat-tio-serrated compacts.
T500 YG11 K30-K40 89-90.2 14.2-14.5 ≥2300 With good wear resistance, suitable for producing nail making moulds,nails specially for cement industry
T500C YG11C K30-K40 86.5-88 14.2-14.5 ≥2400 Coarse grain, with good wear resistance, suitable for drilling hard rock.
T600 YG12 K30-K40 86.5-88 14.1-14.4 ≥2400 With good toughness, suitable for making steel pipe, steel, non-ferrous metal and alloy rods, bars,tubes
T700 YG15 K40 87-88.5 13.9-14.2 ≥2400 Low wear resistance, high bending strength and impact toughness. Suitable for cemented carbide dies,stamp dies and mould cores,etc.
T700C YG15C K40 85-86.5 13.9-14.2 ≥2450 With very good impact and shock resistance,suitable for tungsten carbide dies and mould cores,etc.
T800 YG20   83-85 13.4-13.6 ≥2700 Suitable for wear parts, plates and mechanical parts.
T800C YG20C   82.5-84.5 13.4-13.6 ≥2700 Suitable for cold heading moulds,cold punching moulds and cold rolls for standard parts and tools in various industries.
TN100 YN6   90.5-92.5 14.8-15.1 ≥1700 With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.
TN200 YN7   90-92 14.7-14.9 ≥1800 With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.
TN300 YN10   86-88 14.3-14.6 ≥2000 With good corrosion resistant,suitable wear resistance.
TX35T     93-95 7.9-8.1 ≥1700 With good corrosion resistant,suitable wear resistance.
 

Tungsten Carbide Plastic Cutting Blade for Cutting PP, PE, Pet, BOPP Film


Production Range:

From Application

Blade for cutting thin film
Blade for cutting plastic

Blade for cutting paper
Blade for cutting leather

Blade for cutting Rubber
Blade for cutting metal

Blade for cutting wood
Blade for printing& ink

Blade for cutting fiber
Blade for cutting Cardboard

Blade for cutting food
Blade for cutting Electrical material

Press Brake Tooling
Press brake Dies
 

From Shape

Circular Saw Blade
Rectangular knife

Teeth Type Knife
Repand Type Knife

Sharp-nosed Type knife
Strip steel blades

Trapezoid blades
Special blades
 

From Material

Carbide blade
Ceramic blade

Carbon steel knife
HSS blades

TCT tipped blade
Stainless steel blades

 
Our Features: 

Material
 
Aluminum, Tungsten carbide, Mild steel ,Stainless steel, Chrome steel,
Cold rolled sheet, High Speed Steel, Bearing steel, brass, Copper, Bronze,  
Chrome copper, Mold steel ,SKH51,SKD11,SKS7,SK2,Cr12Mov,H13,9CrSi,
6CrW2SiW6Mo5Cr4V2,YG8,YT15,P20,K30 etc.
 

Surface Treatment          
Plated nickel, copper, zinc .etc. and anodized (Anodic oxidation can accord with
MIL - A - 8625 Type II standards) Hard Anodizing, owder coated, polished, sand
blasted, chemical surface treatment. As customer's request

 
Our Advantages:
1. We are factory providing all kinds of cutting blades, also can manufacture according to your drawing.
2. Low MOQ (1pc is even acceptable in some special conditions)
3. Offering free and quick prototyping (normally 1 week)
4. A series of secondary service available, like casting; forging; welding; heat treatment etc.
5. Top quality guaranteed by skilled workers, managing system and status of facilities.
6. Customized size and spec /OEM available
7. Near Ningbo and Shanghai, convenient transportation

Our Mission
 
Quality & Service: our always have been providing our clients with great quality products and superior customer service.
 
Quick LeadTime: We're dedicated to providing the quickest turnaround times and work very hard to ensure that all of your deadlines are met.
 
Unbeatable Prices We continuously strive to find ways to reduce our production costs, and pass the savings over to you!

PVC WPC Door Board Machine

PVC WPC Door Board Machine which used to produce PVC WPC Door Board.

Interior decoration: furniture board, door board, bathroom cabinet, kitchen cabinet, home decoration board, various household shelves, office board.

Advertising industry: screen printing, computer engraving,ad board, exhibition plate, log plate; Transport industry: ship/plane/bus and train floor covering, core layer, indoors decoration plate.
Building Industry: construction template, rot proof project in chemical industry, thermal shaped part, insulation board, special cool-keeping protection plate.

Pvc Wpc Door Board Machine,pvc wpc door making machine,pvc door making machine,wpc door making machine

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com