Hardness: 55-63
Grade: G40-G1000
Surface: Polished
Diameter: 4mm-150mm
Usage: Motor Parts, Bicycle Parts
Processing Type: Rolling Type
Trademark: taian steelbal
Transport Package: 20kgs/ Carton
Specification: 1/4"
Origin: China
HS Code: 84829100
Hardness: 55-63
Grade: G40-G1000
Surface: Polished
Diameter: 4mm-150mm
Usage: Motor Parts, Bicycle Parts
Processing Type: Rolling Type
Trademark: taian steelbal
Transport Package: 20kgs/ Carton
Specification: 1/4"
Origin: China
HS Code: 84829100
G40-G1000 Grade Bicycle Parts for Auto Spare Part


 
Grades (AFBMA) / Tolerances for Steel Balls
Grade (AFBMA) Ball Diameter Tolerance 
(Ovality Per Ball)		 Basic Diameter Tolerance
(Ball To Ball Variation)
Inches Millimeters Microns Inches Millimeters Microns
20 0.000020 0.0005 0.50 +/- 0.0001 +/- 0.0025 +/- 2.50
25 0.000025 0.0006 0.60 +/- 0.0001 +/- 0.0025 +/- 2.50
100 0.0001 0.0025 2.50 +/- 0.0005 +/- 0.0127 +/- 12.70
200 0.0002 0.0051 5.10 +/- 0.001 +/- 0.0254 +/- 25.40
500 0.0005 0.0127 12.70 +/- 0.002 +/- 0.0508 +/- 50.80
1000 0.001 0.0254 25.40 +/- 0.005 +/- 0.1270 +/- 127
2000 0.002 0.0508 50.80 +/- 0.005 +/- 0.1270 +/- 127
 
Basic information
AISI Number AISI1008~AISI1018,AISI1045,AISI1065~AISI1086
Size 1.0mm----80mm
Grade
G5----G1000
 
Chemical Composition
Item C% Si% Mn% P% S% Density Hardness
AISI 1010 0.08~0.13 0.30Max 0.50Max 0.07Max 0.06Max  7.861g/cm3  HRC 55-63  
AISI 1015 0.13~0.18 0.10~0.30 0.30~0.60 0.04Max *********
AISI 1045 0.43~0.50 0.10~0.30 0.60~0.90 0.04Max 0.05Max
AISI 1086 0.83~0.88 0.10~0.30 0.30~0.70 0.04Max 0.04Max
 
Item Name Material
1 Stainless Steel Ball AISI304/304L/316/316L/420/420C/440C
2 Chrome Steel Ball AISI 52100/ 100Cr6/ Gcr15/ SUJ2
3 Carbon Steel Ball AISI1010/1015/1086
 
Production sequence of steel balls
Wire Coil: Steel wire of specific material and size is checked for correctness.
Cutting: The wire is cut into required lengths.

Forging / Heading: Spherical shapes between dies are formed.
Deflashing: The flash line along the circumference is removed.
Heat Treatment: Chrome and bearing steel balls are thorough hardened. 

Cleaning / Descaling: Basic surface cleaning is done.
Hard Grinding / Filing: An exacting process to achieve required sphericity and size of the steel ball.
Lapping: The final surface finish is acquired through this process.

Polishing / Burnishing: Surface lustre, work hardening, higher product life is achieved.
 Passivation: Carryover iron and other contaminants are removed and a surface film prevents atmospheric and water corrosion on stainless steel balls.
Inspection: For surface finish, size and tolerance. 

Rust preventive oil: Applied on chrome alloy steel balls to save from rusting and corrosion.
Packing: Done as per requirement in numbers, pieces or by weight. VCI paper or bags are used wherever necessary.

Certificate display
G40-G1000 Grade Bicycle Parts for Auto Spare Part

G40-G1000 Grade Bicycle Parts for Auto Spare Part
Advantages of Steel Balls
The best steel, pre-tested, is used with modern production, inspection procedures.
Proprietary polishing, lapping processes employed, result in world class finishes.

Strict quality control and inspection at each stage ensures that each steel ball which 
finally rolls out, conforms to the required quality and specification.
The steel ball are offered in a wide range
Of  material compositions in chrome, bearing, inox and stainless steel;

In sizes ranging from 1 mm to 12.7 mm and 3/64" to 1/2" diameters;
And Grade 100 to 2000, which basically denotes the tolerance and surface finish.
 
 
 
 
FAQ
1. What kind of steel balls can supply ?
Material Carbon, Chrome, Stainless
Size range 0.8mm-150mm
Grade G10-1000
Packing Standard or as customer required
Delivery Stock within a short time or 35 days

2. Some other question?

Q1. -- If 'I' want small quantity and fast delivery. Which way of shipping is advised ?
A1. -- By express.

Q2. -- How many quantity will be packed in one carton or one pallet ?
A2. -- 20 to 25kg per carton,1 ton per wooden pallet.

Q3. -- What's the lead time ?
A3. -- If in stocks,2-5days;or ,it will take 20-35days,depend on the quantity.

Q4. --Which kind of payment will be accepted ?
A4. -- T/T, L/C, ...

Welcome to contact us!
 

G40-G1000 Grade Bicycle Parts for Auto Spare Part
G40-G1000 Grade Bicycle Parts for Auto Spare Part


 
Grades (AFBMA) / Tolerances for Steel Balls
Grade (AFBMA) Ball Diameter Tolerance 
(Ovality Per Ball)		 Basic Diameter Tolerance
(Ball To Ball Variation)
Inches Millimeters Microns Inches Millimeters Microns
20 0.000020 0.0005 0.50 +/- 0.0001 +/- 0.0025 +/- 2.50
25 0.000025 0.0006 0.60 +/- 0.0001 +/- 0.0025 +/- 2.50
100 0.0001 0.0025 2.50 +/- 0.0005 +/- 0.0127 +/- 12.70
200 0.0002 0.0051 5.10 +/- 0.001 +/- 0.0254 +/- 25.40
500 0.0005 0.0127 12.70 +/- 0.002 +/- 0.0508 +/- 50.80
1000 0.001 0.0254 25.40 +/- 0.005 +/- 0.1270 +/- 127
2000 0.002 0.0508 50.80 +/- 0.005 +/- 0.1270 +/- 127
 
Basic information
AISI Number AISI1008~AISI1018,AISI1045,AISI1065~AISI1086
Size 1.0mm----80mm
Grade
G5----G1000
 
Chemical Composition
Item C% Si% Mn% P% S% Density Hardness
AISI 1010 0.08~0.13 0.30Max 0.50Max 0.07Max 0.06Max  7.861g/cm3  HRC 55-63  
AISI 1015 0.13~0.18 0.10~0.30 0.30~0.60 0.04Max *********
AISI 1045 0.43~0.50 0.10~0.30 0.60~0.90 0.04Max 0.05Max
AISI 1086 0.83~0.88 0.10~0.30 0.30~0.70 0.04Max 0.04Max
 
Item Name Material
1 Stainless Steel Ball AISI304/304L/316/316L/420/420C/440C
2 Chrome Steel Ball AISI 52100/ 100Cr6/ Gcr15/ SUJ2
3 Carbon Steel Ball AISI1010/1015/1086
 
Production sequence of steel balls
Wire Coil: Steel wire of specific material and size is checked for correctness.
Cutting: The wire is cut into required lengths.

Forging / Heading: Spherical shapes between dies are formed.
Deflashing: The flash line along the circumference is removed.
Heat Treatment: Chrome and bearing steel balls are thorough hardened. 

Cleaning / Descaling: Basic surface cleaning is done.
Hard Grinding / Filing: An exacting process to achieve required sphericity and size of the steel ball.
Lapping: The final surface finish is acquired through this process.

Polishing / Burnishing: Surface lustre, work hardening, higher product life is achieved.
 Passivation: Carryover iron and other contaminants are removed and a surface film prevents atmospheric and water corrosion on stainless steel balls.
Inspection: For surface finish, size and tolerance. 

Rust preventive oil: Applied on chrome alloy steel balls to save from rusting and corrosion.
Packing: Done as per requirement in numbers, pieces or by weight. VCI paper or bags are used wherever necessary.

Certificate display
G40-G1000 Grade Bicycle Parts for Auto Spare Part

G40-G1000 Grade Bicycle Parts for Auto Spare Part
Advantages of Steel Balls
The best steel, pre-tested, is used with modern production, inspection procedures.
Proprietary polishing, lapping processes employed, result in world class finishes.

Strict quality control and inspection at each stage ensures that each steel ball which 
finally rolls out, conforms to the required quality and specification.
The steel ball are offered in a wide range
Of  material compositions in chrome, bearing, inox and stainless steel;

In sizes ranging from 1 mm to 12.7 mm and 3/64" to 1/2" diameters;
And Grade 100 to 2000, which basically denotes the tolerance and surface finish.
 
 
 
 
FAQ
1. What kind of steel balls can supply ?
Material Carbon, Chrome, Stainless
Size range 0.8mm-150mm
Grade G10-1000
Packing Standard or as customer required
Delivery Stock within a short time or 35 days

2. Some other question?

Q1. -- If 'I' want small quantity and fast delivery. Which way of shipping is advised ?
A1. -- By express.

Q2. -- How many quantity will be packed in one carton or one pallet ?
A2. -- 20 to 25kg per carton,1 ton per wooden pallet.

Q3. -- What's the lead time ?
A3. -- If in stocks,2-5days;or ,it will take 20-35days,depend on the quantity.

Q4. --Which kind of payment will be accepted ?
A4. -- T/T, L/C, ...

Welcome to contact us!
 

G40-G1000 Grade Bicycle Parts for Auto Spare Part

Storage Category

Storage tanks have a wide range of uses, and their main application in China is in the chemical industry. There are also many different types and differences in the raw materials used for tank production. For example, when producing storage tanks, it is possible to choose some rolling polyethylene materials, rolling steel lining materials, carbon steel materials, stainless steel materials, and fiberglass materials as the raw materials for tank production, We can also choose some ceramic or rubber materials as the production raw materials, or we can also choose some welding plastic materials as the production raw materials. However, among these different types of production raw materials, the cost-effective production raw material is the rolling plastic steel lining plastic material, because it not only has good corrosion prevention performance, but also has high strength, There are also many different choices in appearance to meet specific usage requirements, and the service life of rolling plastic steel lined storage tanks is relatively long.

Metal Storage Tanks,Non-Metallic Storage Tanks,Special Material Storage Tank,Lined Anticorrosive Storage Tank

Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com