Silicone overmolding is a process in which silicone rubber is molding with a [metal or plastic part" into mold cavity and then heated to cure, then have the final product which have protective and soft layer. It allowing products to combine the best of two different materials that soft silicone material & hard plastic or metal material.
Benefits of silicon overmolding
Silicone Overmolding,Silicone Overmolding Process,Silicone Rubber Overmolding,Liquid Silicone Overmolding Suzhou FCE precision electronics Co., LTD , http://www.fcesz.com
1. Cable should not be exposed to moisture, heat, corrosion and bumps.
2. Pay attention to the service life of the cable. After the service life expires, check and replace the cable.
3. Do not overload the cable.
4. Check the cables regularly to maintain and repair the cables in time.
5. Lines that have been out of repair for a long period of time should be immediately repaired by an electrician.
6. If the line is in a place that is easily flooded, the line should be relocated, and there should be anti-tide measures for the elevated road.
7. In case of a power outage on a rainy day, the power should be cut off immediately. Please have an electrician check it.
How to maintain the cable device:
1. The surrounding environment should be clean and clean, with no oil, water stains, and materials and products
2. The surface of the machine should be kept clean and the tools should be placed according to the regulations. Items that should not be placed should not be placed.
3. Add oil or cooling oil on time, and check whether the oil supply system is smooth
4. If there is abnormal noise and vibration during the operation, check if the fastening parts are loose
5. If the belt is loose or damaged, it must be replaced
6. Check the safety door, safety fence, safety cover, safety switch of the machine and whether the limit device is normal and effective.
7. The operator must manage, use, maintain, use, inspect, maintain, and troubleshoot the “three good four meetingsâ€.
Quick cycle time
Less number of operations
Better aesthetic part
Enhanced part durability and performance.
Low cost per part for mass production
Application of the silicon overmolding
Medical
Automotive
Aerospace
Consumer Electronics
Controls
Silicon overmolding have many great advantage, different colors can be bonded, different hardness silicon material can be bonded, different materials can bonded, lower price with big volumne, not only unit price.also the mold cost is very lower. It also reduces the labors cost to instead of assembly. Please let us know your thoughts , we will give you the quick turn.
The quality of the cable and the installation environment will greatly affect the service life of the cable. The cable relies on a layer of insulation and will corrode the corrosive gas for a long time, resulting in lower and lower insulation performance. As a result, the aging will become hard and brittle. Even shedding. If the cable loses its insulation performance, the two cables touch each other or the fire wire touches something on the ground, the power running will occur, the temperature of the wire will rise, sparks will occur, and a fire will be caused. Therefore, the following problems should be paid attention to in order not to cause major damage. ACCIDENT.