Construction Hoist Safety Device
Safety is one of the most important for Construction Hoist, thus the Construction Hoist Safety Device is required. SAJ safety device is a product of BQ. When a cage over-speeds the device should act cut off the power stop the cage on mast gradually. The safety device is adjusted and sealed. Do not disassemble it. The using time limit of safety device are signed on it`s nameplate. Safety device must be delivered to the factory and inspected after it reached to time limit.
Safety device board is the connected part between safety device and other structures, it can take the impact of stopping the cage. There are installed lower speed switch, upper travel limit switch and final limit switch, once the switchs touch the relevant cam the cage will act.
We also supply other spare parts for construction hoist, such as construction hoist Mast Section, Construction Hoist Anchorage Frame, Passenger Hoist Cage, Construction Hoist Overload Protector, Sliding Contact Line, Construction Hoist Motor, Construction Hoist Reducer and so on.
SAJ Safety Device,Passenger Hoist Safety Device,Construction Hoist Overload Protector,Overload Limiter,Anti-fall Device SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com
1. Welding Wire ER70S-6 -- Main Characteristics:
A. Low welding costs.
B. High productivity and low electricity consumption.
C. Easy to operate. All-position welding.
D. Very low hydrogen content in the weld and lower nitrogen content. Excellent crack-resistance.
E. Little deformation after welding.
F. Wide applicability. Suitable for welding thin, medium and thick plates.
2. Welding Wire ER70S-6 -- Description:
ER70S-6 is a kind of mild steel copper coated welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
3. Welding Wire ER70S-6 -- Application:
Used to weld ship building steel(A, B, D, E, A36, D36, E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
4. Welding Wire ER70S-6 -- Conform with:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1CO2 Gas Shielded Mig Mag Welding Wire (ER70S-6)
1. Welding Wire ER70S-6 -- Main Characteristics:
A. Low welding costs.
B. High productivity and low electricity consumption.
C. Easy to operate. All-position welding.
D. Very low hydrogen content in the weld and lower nitrogen content. Excellent crack-resistance.
E. Little deformation after welding.
F. Wide applicability. Suitable for welding thin, medium and thick plates.
Â
chemical composition of welding wire(%)C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤ 0.025
≤ 0.035
-
-
≤ 0.50
Mechanical Properties or Deposited Metal
Yield strengthσ 0.2(Mpa)
Tensile strengthσ b(Mpa)
Elongationδ 5(%)
AKV impact(J)
≥ 420
≥ 500
≥ 22
≥ 27(-29)
Wire Size(mm)
φ 0.8
φ 1.0
φ 1.2
φ 1.6
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry. open the packs just when welding to avoid the wire rust.
Before welding please clean out the oil, rust, water etc from the work parts
1. Welding Wire ER70S-6 -- Main Characteristics:
A. Low welding costs.
B. High productivity and low electricity consumption.
C. Easy to operate. All-position welding.
D. Very low hydrogen content in the weld and lower nitrogen content. Excellent crack-resistance.
E. Little deformation after welding.
F. Wide applicability. Suitable for welding thin, medium and thick plates.
2. Welding Wire ER70S-6 -- Description:
ER70S-6 is a kind of mild steel copper coated welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
3. Welding Wire ER70S-6 -- Application:
Used to weld ship building steel(A, B, D, E, A36, D36, E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
4. Welding Wire ER70S-6 -- Conform with:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1CO2 Gas Shielded Mig Mag Welding Wire (ER70S-6)
1. Welding Wire ER70S-6 -- Main Characteristics:
A. Low welding costs.
B. High productivity and low electricity consumption.
C. Easy to operate. All-position welding.
D. Very low hydrogen content in the weld and lower nitrogen content. Excellent crack-resistance.
E. Little deformation after welding.
F. Wide applicability. Suitable for welding thin, medium and thick plates.
Â
chemical composition of welding wire(%)C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤ 0.025
≤ 0.035
-
-
≤ 0.50
Mechanical Properties or Deposited Metal
Yield strengthσ 0.2(Mpa)
Tensile strengthσ b(Mpa)
Elongationδ 5(%)
AKV impact(J)
≥ 420
≥ 500
≥ 22
≥ 27(-29)
Wire Size(mm)
φ 0.8
φ 1.0
φ 1.2
φ 1.6
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry. open the packs just when welding to avoid the wire rust.
Before welding please clean out the oil, rust, water etc from the work parts
Model NO.: ER70S-6
Spool Material: Plastic,Metal
Trademark: luhan
Transport Package: Plastic Spool/Metal Spool
Specification: 5kg, 10kg, 15kg, 25kg
Origin: China
HS Code: 831100000
Model NO.: ER70S-6
Spool Material: Plastic,Metal
Trademark: luhan
Transport Package: Plastic Spool/Metal Spool
Specification: 5kg, 10kg, 15kg, 25kg
Origin: China
HS Code: 831100000
CO2 Gas Shielded Mig Mag Welding Wire (ER70S-6)