China is a country with coal as its main energy source. There are millions of chimneys in the country that continuously emit smoke to the atmosphere day and night. Flue gas emission control has become an important project to eradicate pollution. Due to the rapid increase in population and the rapid development of industrial production, the environment has been seriously deteriorated, and it has reached a dangerous level. The state regards sustainable development as a national policy, and it will be the biggest issue in the 21st century. The management of air pollution and water pollution must be strengthened, and the basis of management is the quantitative control of pollution. In the United States, legislation has been established for smoke emission standards. Each chimney must be equipped with a flue gas analyzer and an electromagnetic sewage flow meter to form a continuous emission monitoring system (CEMS). Smoke exhaust gas flow measurement is a difficult measurement problem, and its difficulty is:
Large diameter, such as an irregular shape of the chimney, a few meters long;
The gas composition varies;
Wide range of flow rates, from very low speeds to high speeds;
Dirty, dust, corrosion;
The flow channel is non-circular in cross-section, with no similarity, and the velocity distribution in the channel is complex;
There is no straight pipe section, the shape of the spoiler is complex, the speed distortion and the rotating flow;
Can not be individually calibrated to determine the meter coefficient;
Static pressure, requiring instrument low pressure loss;
High temperature (above 200°C);
The discharge of waste liquids and sewage has seriously polluted rivers and lakes, causing the water resources, which have been seriously lacking, to be destroyed. The already tense water resources are even worse. The management of waste liquids and sewage discharge is an urgent task. However, waste water and sewage flowmeters have difficulties in flow measurement due to the contamination of the measured medium, large diameter, special shape, low head pressure, wide flow velocity range, and lack of pipe flow. The number of flowmeters needed by factory enterprises and people's lives is extremely large, and the types need to be diversified to adapt to a wide range of needs. The flowmeters required for environmental protection projects will continue to put forward new requirements along with the in-depth development of the project. For example, large-scale wastewater reclamation equipment, urban waste treatment equipment, and water recycling systems of industrial and mining companies all require a wide range of flowmeters.
Twin Shaft Concrete Mixers
The mixing arm drives the mixing blade to force the mixing of the material in the tank body, the mixing effect is very strong, and the mixing quality is better.There are two steel bearing protection circles between the mixing arm and shaft.to prevent coarse sand.In the steel circles there is a airway. When certain pressure of air goes though it,a pressure protection mat will be formed between the interface of the mixing arm and shaft to prevent water and mud from close to shaft head and prolong the service life of the mixer.
Twin Shaft Concrete Mixers,Double Axle Concrete Mixer,Vertical Shaft Concrete Mixer,Twin Shaft Industrial Concrete Mixer
Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.sdmobileconcretebatchingplant.com