Textile and Garment Industry Customized Broken Needle Detector Machine

Scope of application:

Mainly used for toys, clothing, textiles, footwear, food and other industries, used to detect mixed or lost in raw materials or products in the broken needle, wire and other iron-containing metal.

 

Features:Needle metal detector machine for garment factory

 

1. The latest development of the chip, high performance and high reliability;

2. High sensitivity, high anti-interference ability;

3. From the data acquisition to the motor control are used digital signal processing (DSP), highly intelligent;

4. Easy to use, automatic data processing and preservation, each boot can keep the shutdown settings;

5. Self-developed high-frequency switching power supply, suitable for strong ability;

6. The use of integrated design, optimize product design, reduce the number of components, by the computer to replace the complex electronic components, the failure rate doubled;

7. by the computer to precisely control the timing of the motor to extend the life of the motor;

8. Accurate count, qualified, defective, total;

9. No one is operating automatically after the shutdown.

SPECIFICATIONS:

 

Model	Detecting area		Detecting Sensitivity	Power Supply	Power Consu-mption	Dimension(mm) L×W×H
	Width	Height
SMC6010A	600mm	100mm	Fe. BallΦ≥0.8mm	AC220v±50HZ	60w	1820×1050×900
SMC6012A	600mm	120mm	Fe. BallΦ≥1.0mm			1820×1050×920
SMC6015A	600mm	150mm	Fe. BallΦ≥1.2mm			1820×1050×950
SMC6020A	600mm	200mm	Fe. BallΦ≥1.5mm			1820×1050×1000
SMC6025A	600mm	250mm	Fe. BallΦ≥1.0mm			1820×1050×1050
SMC6030A	600mm	300mm	Fe. BallΦ≥2.5mm			1820×1050×1100
Detecting Method			Magnetic induction
Sensitivity Adjustment			10steps
Alarm Method			Buzzer, 8 indicators for steel locating
Belt Speed			25m/min
Net Weight			180kg

Our Service


12 Months Guarantee

•    12 months free main parts change (Airmail the broken parts back first)
•     Overseas engineers available (Your part needs to pay for the travel expense)

Customization

       All our machines can be customized , according to your product's features and your workshop environment, or your production line.

 

After-sales Service Provided

    Engineers availbale to provide after-sales service overseas in order to help customers solve technical problems.

 

Ultrasonic Drilling Rig For Geological Survey Investigation

Sonic drilling is a soil penetration technique that strongly reduces friction on the drill string and drill bit due to liquefaction, inertia effects and temporary reduction of porosity of the soil. The combination makes penetrating for a large range of soils easy for our Sonic rigs and tooling. The penetration rates in most bedrock are faster with this technology also.

At first glance, a SONIC drilling rig looks very much like a conventional air or mud rotary drill rig. The biggest difference is in the drill head, which is slightly larger than a standard rotary head. The head contains the mechanism necessary for rotary motion, as well as an oscillator, which causes a high frequency force to be superimposed on the drill string. The drill bit is physically vibrating up and down in addition to being pushed down and rotated. These three combined forces allow drilling -to proceed rapidly through most geological formations including most types of rock.

In overburden, the vibratory action causes the surrounding soil particles to fluidize, thereby allowing effortless penetration. In rock, the drill bit causes fractures at the rock face, creating rock dust and small rock particles, which facilitates advancement of the drill bit. In many instances the drilling and coring of rock and earth can be accomplished without the use of any drilling fluid whatsoever. This is an important requirement for environmental drilling projects. Compressed air, drill mud, or plain water can be utilized to remove the cuttings and speed up the operation further, depending on the application that the machine is used for.

The oscillator is driven by a hydraulic motor and uses out of balance weights to generate high sinusoidal forces that are transmitted to the drill bit. An air spring is also incorporated in order to confine the alternating forces to the drill string. The frequency can be varied to suit operation conditions and is generally between 50 and 160 hertz (cycles per second). As a comparison, ordinary household current in many countries alternates at 60 hertz. This frequency range falls within the lower range of sound vibrations that the human ear is capable of hearing.

While the principle behind the SONIC drill rig appears complicated, the machine is actually very simple to operate. The driller only adds vibratory energy to the normal rotary motion. He simply chooses a frequency that gives him the best drilling rate or best core recovery, as the case may be.

Ultrasonic Drilling Rig for Geological Survey Investigation,Geological Ultrasonic Drilling Rig

Henan YK Prospecting Machinery Co., Ltd , https://www.yyundergrounddrillingrig.com