Model NO.: SUNWELL-SW600
Product Name: Spiral Wound Gasket
Color of Gaskets: According The ASME Standard
Certificate: Dnv ISO9001,SGS
Quality: High Level of Spiral Wound Gasket
Trademark: SUNWELL
Transport Package: Wooden Case for Spiral Wound Gaskets
Specification: according your request
Origin: Ningbo, China
Star product:Spiral wound gasket from Sunwell seals/CG/CGI/IR/R Type
1.Products are manufactured in accordance with all relevant gasket standards.
2.All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc.
3.Our production capacity is 150,000 pcs per month.
4.Material combinations for all operating conditions. 
 
Sunwell seals spiral wound gaskets have 4 types:
1.SW600-R Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
2.SW600-IR Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
3.SW600-CG Outer Ring Type 
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
 
4.SW600-CGI Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.


Spiral wound gaskets

More information of spiral wound gaskets,please contact with sunwell seals,thanks.

301 Stainless Steel Cut Wire Shot

Longlived 301 Stainless Steel Shot is made from high quality 301 stainless steel wire by drawing, cutting and round. It has been widely used on surface treatment of springs, gears, screws, chains and many other dis casting parts for surface treatment of deburring, anti-corrosion, anti-fatigue and so on.

Its advantage is as below:

1. It is obtained by cutting the wire so that there is no hallowness one in bulk. It has a great durability and long service life. It's

2. The cutting process is fully completed by automatic machine so its particle fineness is extremely uniform.

3. Grinding process changes the surface of Stainless Steel Shot to make parts have a fine and smooth surface.

4. It has a great characteristics of moderate hardness, high strength and good toughness. When used in shot blasting machine, it will not be broken easily and could save much time and cost.

5. It will not rust even in a wet environment for a long time due to its material of stainless steel.


Using Longlioved 301 Stainless Steel Shot could make shot blasting faster, safer and cleaner. Welcome all of clients to connect with us to learn more.

301 Stainless Steel Cut Wire Shot,Sus301 Stainless Steel Cut Wire Shot,Ss301 Stainless Steel Cut Wire Shot,Sand Blasting Abrasive Steel Shot

Longlived Metal Products Co ., Ltd , https://www.stainlesssteelshotcn.com