Brand New Yanmar 4 Stroke Water-Cooled Marine Diesel Engine (4LHA-HTP)

Brand New Yanmar 4 Stroke Water-cooled Marine Diesel Engine
(4LHA-HTP)

· With IMO Tier III upgrading capability, it saves 15-20% fuel consumption compared 
with the same model and reduces 15% emissions compared with IMO T2.

· Its torque at low speed is 8~13% larger than that of the same model.It is powerful in trawl, with strong beaching capability.It can be started easily with quick throttle response and entire process monitoring.

· It has low exhaust temperature, good antiknock performance, small vibration and low noise.

·The bulk weight is 10~15% lower than that of the same model.It can be installed easily by adding the valid capacity.

Engine Type	4LHA-HTP
Displacement (L)	3.455
Bore x Stroke (mm)	100*110
Rated Output (kW/150)	118/160
Rated Speed (rpm)	3300

 

 

Brand New Yanmar 4 Stroke Water-cooled Marine Diesel Engine
(4LHA-HTP)

· With IMO Tier III upgrading capability, it saves 15-20% fuel consumption compared 
with the same model and reduces 15% emissions compared with IMO T2.

· Its torque at low speed is 8~13% larger than that of the same model.It is powerful in trawl, with strong beaching capability.It can be started easily with quick throttle response and entire process monitoring.

· It has low exhaust temperature, good antiknock performance, small vibration and low noise.

·The bulk weight is 10~15% lower than that of the same model.It can be installed easily by adding the valid capacity.

Engine Type	4LHA-HTP
Displacement (L)	3.455
Bore x Stroke (mm)	100*110
Rated Output (kW/150)	118/160
Rated Speed (rpm)	3300

 

 

Preform Mould

Features of the perform mold:
♦ No cutting of valve gate is employed to reduce the labor cost.
♦ Advanced hot runner system assures lower level of AA value.

♦ Reasonable-designed cold water channels increase cooling effect and shorten the cycle time.

The 1-16 cavity, the 24 cavity, the 32 cavity, the 48 cavity, the 72 cavity, the 96 cavity, and the 144 cavity bottle billet mold.

Preform Mold, PET Preform Mold, Injection Preform Mold, Preform Mold for Injection Machine;

TAIZHOU WATON MACHINERY CO LTD , https://www.watonblowing.com